PV Connectors & Custom Cable Assemblies for 1500 V Solar Projects

Standard connector models carry no fixed MOQ. Build-to-order cable assemblies start at 200 sets per model for a repeat configuration and 500 sets for a new drawing, because tooling, cable scheduling and test fixture setup are fixed costs that have to be spread across the run. Sample orders of 1-5 sets are built before the production run and credited against it.

Standard connector models ship from stock. Build-to-order assemblies follow one schedule: samples in 5-7 working days for a repeat configuration and 7-12 working days for a new drawing, then 15-20 days of production after drawing release, or 20-30 days after sample approval where the design is new or needs overmold tooling. Freight and any customer inspection add to the door-to-door time.

Yes. Samples are available for evaluation. Sample availability, cost and shipping will be confirmed according to the model and destination.

Yes. We provide the applicable datasheet and certification information for the specific model quoted. Certification scope varies by product.

For safety and compliance, connectors should normally be used as matched male and female pairs from the same manufacturer. Cross-mating should only be considered when the exact combination is approved under the applicable project and certification requirements. The full assessment procedure is set out in our guide to PV connector cross-mating and intermateability.

Yes. Please provide the cable size, cable length, connector configuration, labeling, quantity and drawing if available. Our team will evaluate the specification and recommend a suitable solution.