Treasol supplies PV connectors, fuse and diode connectors, junction boxes, harnesses and cable to distributors who resell under their own name or stock a house range. A solar connector supplier for distributors has to hold three things steady: supply that does not move, pricing that improves with volume, and documents your market inspector will accept. Those are the three things set out on this page.
Five things, each one written into the account rather than promised in general terms.
| Item | How it works |
|---|---|
| Tiered pricing | The tier is set by the annual volume band, the model mix and the packing specification, and is reviewed against the same three inputs. It is agreed in writing, not applied retroactively. |
| Private label | Housing colour, logo mark on the housing, cable and overmold specification, packing, carton marks and barcodes. Built to artwork, produced on the line, not relabelled afterwards. |
| Mixed orders | A stocking order can combine models across the range in one shipment. The per-model quantity is what the tier is calculated on, so a mixed container does not lose the band. |
| Technical support | Model selection against the cable and current in use, crimping tool and pull-out force limits, and the certificate scope per model. Questions go to engineering, not to a call centre. |
| Claims handling | Non-conforming goods are replaced or credited after inspection, with the inspection report supplied with the credit note. |
Everything below is a current product line, not a sourcing promise. Price ranges shown are the published ranges for the category and depend on model and order quantity; final pricing is quoted per order.
USD 0.40–3.50 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 3.00–5.00 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 0.40–0.60 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 2.50–10.00 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 2.00–3.00 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 1.90–2.50 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 5.00–100.00 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 0.30–15.00 per piece, depending on model and order quantity. Final pricing is quoted per order.
USD 0.60–3.00 per piece, depending on model and order quantity. Final pricing is quoted per order.
Categories without a price line are parent groupings or lines where a public range has not been set; those are quoted on request. For assemblies built to a drawing rather than catalogued parts, see the custom PV wire harness line, and for branding on catalogued connectors see the 1500 V connector OEM programme.
No product carries every mark for every country, and no supplier that says otherwise is being straight with you. What we issue is the document set for the model you are buying, plus the market-specific documents your inspector asks for.
| Document | What it covers | Where it applies |
|---|---|---|
| Datasheet | Dimensions, rated voltage and current, conductor cross-section range, material and temperature range | All markets |
| Certificate copy for the model supplied | The certificate that covers the specific model, issued by TÜV Rheinland or UL as applicable to that model | EU: IEC 62852 scope. US: UL 6703 scope |
| Crimping specification | Tool and die set per terminal, pull-out force limit per cross-section | Installers and assembly partners |
| Packing specification | Carton quantity, carton marks, barcodes, private-label artwork reference | Private-label accounts |
| Market-specific requirement | Anything beyond the above is confirmed per destination before the order is released | Confirmed per destination |
Scope, stated plainly. The certificate list on this site covers PV cable connectors, the solar fuse connector, the junction box and the PV fuse holder. A model outside those entries is supplied with the datasheet and the certificate that actually covers it, and we say so on the quote rather than after delivery. The full list is on the certifications page.
| Term | Position |
|---|---|
| MOQ, standard models | No fixed minimum. Standard models can be ordered from one piece. |
| Pricing tiers | Set by annual volume band, model mix and packing specification, agreed in writing and reviewed against the same inputs. |
| Sample lead time | 5-7 working days for a repeat configuration, 7-12 working days for a new drawing. |
| Production lead time | 15-20 days after drawing release for a repeat configuration, 20-30 days after sample approval where the design is new or needs new overmold tooling. |
| Packing | Bulk cartons as standard; private-label bags, carton marks and barcodes to your artwork. |
| Territory | Reviewed per application. No automatic exclusivity; where exclusivity is agreed, the territory, range and review date are recorded in writing. |
| Trade and payment terms | Confirmed with the quotation for the destination and order size. |
Four steps. The first two run in parallel, so the documentation pack is ready when the application is approved rather than after it.
Company name, country, the product lines you already carry, your sales channel and an annual volume band.
Form on this pageWhich standards and documents your market requires, and which models in the range meet them.
Output: documentation packSample sets built on production tooling, credited against the first production order.
5-12 working daysTier set by annual band, mix and packing; territory recorded where it is agreed.
Output: account terms
Yes. Private label covers the housing colour, the logo mark on the housing, the cable and overmold specification, and the packing and carton marks. Private label runs are quoted per programme because the quantity and tooling position depend on the scope.
Exclusivity is not granted by default. Territory is reviewed per application against the annual volume band, the product range carried and the sales channel. Where exclusivity is agreed, the territory, the range and the review date are recorded in writing.
Yes. Samples are built on production tooling and credited against the first production order. Sample lead time is 5-7 working days for a repeat configuration and 7-12 working days for a new drawing.
Standard connector models carry no fixed minimum and can be ordered from one piece. Distributor pricing tiers are set by the annual volume band, the model mix and the packing specification rather than by a single order minimum.
Claims are handled per order. Non-conforming goods are replaced or credited after inspection, and the inspection report is supplied with the credit note. This covers conformity to the agreed specification, not a general returns policy.
Tell us what you sell today and where. We reply with the applicable documentation pack, the tier your volume band falls into, and the sample schedule.
Send the range you want, the market you sell into and the volume band. We will come back with the documents, the tier and the sample schedule.
Talk to the sales team